by amnani.adnan | Mar 10, 2011 | Blog, closed corner, sheet metal, tips and tricks
Let’s talk about a feature in sheet metal, closed corner. I had created a part using sheet metal.But I have a situation here, after I flatten it, there is a gap (Highlighted in red circle). But I don’t want the gap, so I decided to remove the unwanted material; to... by amnani.adnan | Feb 21, 2011 | Blog, tips and tricks
Have you ever wonder “link to the thickness” cut that we did in Sheet Metal can be applied to solid modelling? Here is the tip that I would like to share with you.Most of the time, we have to perform an extrude cut, double click on the depth dimension and select link... by amnani.adnan | Nov 25, 2010 | Blog, tips and tricks
Put your hand together for our new join member- Farizal!~ (temporary he prefer us to help posting. Soon, he going to do this by himself.)Designing by my definition is a work that required you to do it right and to do it fast. You goal is not just to finish the... by amnani.adnan | Jun 12, 2010 | Blog, sheet metal, tips and tricks
I have received an imported sheet metal part and was asked to create some cutting along the stepped faces. Normally, when we plan to create some cutting along a folded part we will rather to make it flatten so that it is easier for us to sketch out the shape on the... by amnani.adnan | Apr 27, 2010 | Blog, knurling, tips and tricks
There is discussion in my ChatWorks, discussion how to model a knurling in SolidWorks. It not difficult, just that it consume quite a lot of memory. So, below video capture the steps. Hope this is helpful. Thanks.note: I received a few followers complaining the... by amnani.adnan | Apr 21, 2010 | Blog, tips and tricks
For you information, since 2010, the Show Dimension Names setting is now controlled and saved per document instead of for all documents as a system setting.Previoulsy (SolidWorks 2009 and before), this setting was controlled under Tools>Option>System...